The Organ Forum
Discussion forums for the King of Instruments
Welcome to The Organ Forum
Sign in
|
Join
|
Help
in
Hammond Organs (forum)
Hammond & Home Organs (group)
(Entire Site)
Search
Home
Forums
Photos
The Organ Forum
»
Hammond & Home Organs
»
Hammond Organs
»
hammond hr-40 amp powering leslie 147
hammond hr-40 amp powering leslie 147
Last post 07-24-2008, 12:11 PM by
shwaggetyshfifty
. 2 replies.
Sort Posts:
Oldest to newest
Newest to oldest
Previous
Next
07-21-2008, 1:40 PM
58771
shwaggetyshfifty
Joined on 05-27-2008
Posts 81
hammond hr-40 amp powering leslie 147
okay, i've read up on installing a 1/4 inch input on an hr-40, and i just need to go and get some 200 ohm resistors, and it should be pretty simple. but a couple of hours ago it hit me that the output of the amp in the hr-40 could be wired to the crossover of my 147. is this perhaps a bad idea? due to speaker replacement from the previous owner, the leslie is 8 ohms i think, but what is the output of an hr-40? is this by chance a really stupid idea that could ruin my equipment?
open for advice on bettering my b3, h-112, L-112, R-124, and crappy model 123 hammond organs.
Report abuse
07-22-2008, 8:09 PM
58875
in reply to
58771
fredy2
Joined on 02-19-2005
Renton WA
Posts 338
Re: hammond hr-40 amp powering leslie 147
The info I found is that the speakers are in the 5 to 8 ohm range for the HR40, so you should be OK... You won't damage anything...
Fred
Report abuse
07-24-2008, 12:11 PM
58964
in reply to
58875
shwaggetyshfifty
Joined on 05-27-2008
Posts 81
Re: hammond hr-40 amp powering leslie 147
thanks. now all i need is help installing the input on that amp
open for advice on bettering my b3, h-112, L-112, R-124, and crappy model 123 hammond organs.
Report abuse
Copyright 2003 - 2008 Zuma Group, Inc.
The opinions expressed here are those of the individual and
do not represent the views of Zuma Group, Inc.