Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Hammond Tone Cabinet Reverb Drive Transformers

  1. #21
    ff Fortissimo Tim_at_Jonas's Avatar
    Join Date
    Feb 2010
    Location
    Indianapolis, IN
    Posts
    1,025

    Quote Originally Posted by 2Tracker View Post
    Interesting....by comparison, I believe the “standard” Fender approach is to use a 12AX7 with linked plates to drive the reverb. Just on paper, I’m thinking this is a lot more gain than a 6SN7 in similar configuration, but if the Hammond preamp is already providing a higher gain….


    I’m trying to puzzle out what would be best in a +4 dBm studio environment, and whether or not the 6SN7 will provide sufficient gain to drive the reverb. I could add a gain control, but I’m thinking it’s not best to place this in front of the first gain stage (in this case, the 6SN7 or 12AX7) for noise considerations….
    Fender uses a 12AT7 with the triodes in parallel (plates, grids, and cathodes), driving a transformer. The Fender transformer drives a tank with an input impedance of "8 to 10 Ohms" (DC resistance of .8 to 1.3 Ohms).

  2. #22
    ppp Pianississmo 2Tracker's Avatar
    Join Date
    Mar 2017
    Posts
    7

    2 members found this post helpful.
    Hey Folks!

    Wanted to thank you--especially David Anderson--for the input on this project. I wanted to share a photo of the completed unit; going to drop it off at its intended home soon and then fill the oil tubes.

    Circuitwise, the best route was, not surprisingly, to follow Hammond's schematic closely, just using parts on hand and making small changes as needed.
    FluidReverb1.jpg

Page 3 of 3 FirstFirst 123

Similar Threads

  1. Reverb Oil type in a HR-40 Tone Cabinet?
    By Erik Larson in forum Leslies, Tone Cabinets, Speakers, & Accessories
    Replies: 1
    Last Post: 01-18-2013, 01:38 AM
  2. Replies: 14
    Last Post: 08-19-2012, 03:34 PM
  3. PR-40 Tone Cabinet - Reverb
    By bonanza in forum Hammond Organs
    Replies: 3
    Last Post: 02-04-2011, 06:13 AM
  4. Hammond HR-40 Tone Cabinet
    By jmpk58 in forum General Chat
    Replies: 27
    Last Post: 12-09-2009, 10:24 PM
  5. DR20 tone cabinet (oil reverb question)
    By NYCFarmboy in forum Hammond Organs
    Replies: 15
    Last Post: 09-27-2007, 12:16 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •