Leslie Solid State Circuit Board

[tonewheel1966]

I'm going to be getting a 710 chassis to use in my haunted Leslie 825 and will be completely dismantled and cleaned and desoldered. Some of the solder tracings are coming off the board and I want to know if any of you techs know if there is a repair pen available that I can use to draw the effected area and then solder on top of. I have seen a "highly conductive pen" but don't know whether this could handle the 230 VAC.

Cheers

Dave

[Jlw]

I would not recommend using such a pen for the trace repairs. I think you would be better served by wiring point to point to replace the affected traces.