ptbuzzcut
01-28-2005, 12:10 AM
I got hold of a two speed motor from a Wurlitzer organ. I have no idea of how to wire this item. There are two motors attached to a plate. On each motor is a coil of wrapped wire, each with two black wires attached. Underneath the motor, there is a black wire attached with a metal spade or ring. It attached to a 'leg' of the motor which has a spring in it. There is also a short wire with the same spade, but not attached as well as a longer piece of the wire with yet another spade. Then the wire goes to a wire nut from which extends more of the 'main wire as well as a piece of braided wire with an attachment on the end. That is a small metal piece with two springs attached. On top of the springs are plastic 'nuts'. The end of the metal 'housing' forms half of a clamp that looks like it should be attached to something. Does anyone have any idea as to how this motor is wired? I would greatly appreciate some help. I can take a digital picture and send it if someone thinks they have an idea on this. THANKS